9.5k Spares

Current & Voltage On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V. Simple Operation The switch can be disconnected and reconnected by simply turning the knob and is supplied with bolts. Sturdy Construction The switch is made of ABS plastic housing and solid brass nut, rust-proof, corrosion-resistant, durable, and safe to use. Great Compatibility The battery switch used on DC 12 – 48 V systems to isolate and secure the electrical system. Safety Protection The battery switch eliminates any drain on the battery and safely disconnects it when the vehicle or boat is not in use. Datasheet Max. Current 275A Max. Voltage 48V Switch Function ON-OFF Termination Stud Size 3/8″ (10 mm) x 2 Operating Temperature -25℃~+85℃ Housing color BK-Black  

Carbon Winches Australia Fully Sealed Solenoid - 600amp peak rating Our solenoid is supremely reliable. With zero warranties or failures since its release, you can be sure this solenoid unit will do the job for your winching duties.   

Carbon Winches Wireless Remote Control kit. Plug in replacement of the receiver box inside the control box with a matched remote controller. 

This is a 12 volt winch replacement CONTROL BOX, COMPLETE with WIRELESS CONTROLLER. Suitable for CW-12k, CW-95P and CW-17K models only. The Carbon Offroad 12 volt control box and is an advanced, modern and powerful replacement for your original winch control. This device incorporates a wireless remote that gives you the ability to stay in the cab of your truck but still have complete control over activating or deactivating on site. The carbon offroad 12 volt "control box" also ensures a precise, even amount of power used for every pull as opposed to just one strong one. And unlike the old-fashioned cable, you never have to risk getting tangled from ground level again!

Battery Isolator Switch complete with 4 x mounting bolts with nuts and a 30cm power cable Current & Voltage On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V. Simple Operation The switch can be disconnected and reconnected by simply turning the knob and is supplied with bolts. Sturdy Construction The switch is made of ABS plastic housing and solid brass nut, rust-proof, corrosion-resistant, durable, and safe to use. Great Compatibility The battery switch used on DC 12 – 48 V systems to isolate and secure the electrical system. Safety Protection The battery switch eliminates any drain on the battery and safely disconnects it when the vehicle or boat is not in use. Datasheet Max. Current 275A Max. Voltage 48V Switch Function ON-OFF Termination Stud Size 3/8″ (10 mm) x 2 Operating Temperature -25℃~+85℃ Housing color BK-Black  

Mounting bolt kit to mount winch to a winch compatible bullbar.  15 x 15mm square head nuts. Mounting bolts are 10x40mm long.  All hardware Grade 8 High tensile.   

Carbon Winches winch motor breather parts kit - no hose included.  3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.    Included in the kit:  Right angle push to fit threaded breather to motor fitting right angled mounting bracket self drilling mounting screw with urethane washer brass porous breather fitting and push to fit fitting for the breather end 

Carbon Winches winch motor breather parts kit - no hose included.  3 metre breather kit for any electric winch. Uses a 1/4NPT thread into the winch motor housing.    Included in the kit:  Right angle push to fit threaded breather to motor fitting right angled mounting bracket self drilling mounting screw with urethane washer brass porous breather fitting and push to fit fitting for the breather end 

Brush kit to suit V2 V3 Carbon Winch 12K and Scout Pro electric motors.